Evaluation of Implementation Preparation for CE based on BEACON model —Taking Construction Enterprises in Yemen as a Case of Illustration

Authors

  • Sabrinaji Dahmas Department of Construction Management, Dalian University of Technology
  • Zhongfu Li Department of Construction Management, Dalian University of Technology
  • Mahmood Ahmad State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology； Department of Civil Engineering, University of Engineering and Technology Peshawar (Bannu Campus)

DOI:

https://doi.org/10.30564/frae.v3i1.1723

Abstract

After decades of civil war, Yemen is in a desperate situation, and the construction industry has been suffering from low productivity and poor performance. In order to improve the productivity for the Yemeni construction industry, Construction enterprises must adopt the best and new technologies, new management concepts and philosophies such as Total Quality Management (TQM) and concurrent engineering (CE) owing to achieve improvements in the process of product development. To ensure the successful implementation of CE in the Yemeni construction industry, it is necessary to assess the readiness of those companies to implement CE. In this paper, the BEACON model is used to assess the readiness of the Yemeni companies to implement the concept of CE, that assist in overcoming the construction industry's poor productivity and performance. A study assessing CE implementation readiness will help to promote successful CE implementation in the construction industry and enhance the efficiency of construction companies. The results show that most of the construction companies in the Yemen are not ready to implement CE. The main reason is that the enterprises rely heavily on traditional management methods, and need to improve the organization and management technology. The research results can provide theoretical support for construction companies, especially Yemen companies, to establish basis in implementing an appropriate CE approach for improving performance, and also help international construction companies entering the Yemen construction market to cooperate and implement CE. 

Keywords:

Concurrent engineering (CE), Construction industry, BEACON model, Yemen construction enterprises

References

[1] Safdari, F. Concurrent Engineering in Construction Projects-Lesson learned from the oil and gas industry, Gothenburg: Chalmers University of Technology, 2018.

[2] Zidane, Youcef J.T, et al. "Barriers and challenges in employing of concurrent engineering within the Norwegian construction projects." Procedia Economics and Finance 21 (2015): 494-501.

[3] Dahmas, S.; Li, Z.; Sha, L. Solving the Difficulties and Challenges Facing Construction Based on Concurrent Engineering in Yemen. Sustainability 2019, 11, 3246–3257.

[4] Paulson, J.; Boyd, C. Designing to reduce construction costs. J. Constr. Div. 1976, 102, 587–592.

[5] Shouke, C.; Wei, Z.; Li, J. Comprehensive evaluation for construction performance in concurrent engineering environment. Int. J. Proj. Manag. 2010, 28, 708–718.

[6] Love, P.E.; Gunasekaran, A.; Li, H. Concurrent engineering: A strategy for procuring construction projects. Int. J. Proj. Man 1998, 16, 375–383.

[7] Jaafari, A. Concurrent construction and life cycle project management. J. Constr. Eng. Manag. 1997, 123, 427–436.

[8] Khalfan, M.; Naveed, R. Improving construction process through integration and concurrent engineering. Constr. Econ. Build. 2005, 5, 58–66.

[9] Ahmad, Saad BS, et al. "A review of performance measurement for successful concurrent construction." Procedia-Social and Behavioral Sciences 226 (2016): 447-454.

[10] Ibrahim, Khairil Izam, Seosamh B. Costello, and Suzanne Wilkinson. "Key practice indicators of team integration in construction projects: a review." Team Performance Management: An International Journal (2013).

[11] Khalfan, M.M; Anumba, C.J; Carrillo, P. Readiness Assessment for Concurrent Engineering in Construction]; Taylor and Francis Books Ltd, London, 2012; 30-57

[12] Shouke, Chen, Wei Zhuobin, and Li Jie. "Comprehensive evaluation for construction performance in concurrent engineering environment." International Journal of Project Management 28.7 (2010): 708-718.

[13] Karningsih P D, Anggrahini D, Syafi’i M I. Concurrent engineering implementation assessment: a case study in an Indonesian manufacturing company[J]. Procedia Manufacturing, 2015, 4: 200-207.

[14] Khalfan, Malik MA, Chimay J. Anumba, and Patricia M. Carrillo. "Concurrent Engineering Readiness Assessment Tool for Construction." Architectural engineering and design management 1.3 (2005): 163-179.

[15] Parsaei, Hamid R., and William G. Sullivan, eds. Concurrent engineering: contemporary issues and modern design tools. Springer Science & Business Media, 2012.

[16] Sapuan, S. M., and M. R. Mansor. "Concurrent engineering approach in the development of composite products: A review." Materials & Design 58 (2014): 161-167.

[17] Anumba, Chimay J., Catherine Baugh, and Malik MA Khalfan. "Organisational structures to support concurrent engineering in construction." Industrial management & data systems 102.5 (2002): 260-270.

[18] Syan, Chanan S., and Unny Menon, eds. Concurrent engineering: concepts, implementation and practice. Springer Science & Business Media, 2012.

[19] Anumba C, Kamara J M, Cutting-Decelle A F, eds. Concurrent engineering in construction projects. Routledge, 2006.

[20] Khalfan, M.M.A.; Anumba, C.J.; Carrillo, P.M. Tool for Construction Concurrent Engineering Readiness Assessment Tool for Construction. Archit. Eng. Des. Manag. 2011, 1, 163–179.

[21] Ahmad, Saleh Alawi, et al. "Evaluation of risk factors affecting time and cost of construction projects in Yemen." International Journal of Management (IJM) 4.5 (2013): 168-178.

[22] Saeed, Nashwan Mohammed Noman, and Awad Sad Hasan. "The effect of total quality management on construction project performance." Journal of Science and Technology 17 (2012).

[23] Alaghbari, Wael, Abubaker A. Al-Sakkaf, and Basel Sultan. "Factors affecting construction labour productivity in Yemen." International Journal of Construction Management 19.1 (2019): 79-91.

[24] Al-Sabahi, Mohammed H., et al. "Exploring criteria and critical factors for governmental projects implementation in Yemen: a case study." Journal of Surveying, Construction and Property 5.2 (2014): 1-17.

[25] Khalfan, A. Benchmarking and readiness assessment for concurrent engineering in construction, Loughborough:Loughborough University, 2001.

[26] M. Lawson, H. M. Karandikar, "A Survey of Concurrent Engineering," Concurrent Engineering : Research and Application, vol. 2, 1994,pp. 1-6.

[27] R. Panizzolo, S. Biazzo, G. Patrizia, "New Product Development for SMEs: A Review," presented at the XIII International Con-ference on Industrial Engineering and Operations Management, Brazil, 2007.

[28] De Graaf, R., and E. J. Sol. "Assessing Europe’s readiness for concurrent engineering." Proceedings of Conf. on Concurrent Engineering: Research and Application. Vol. 77. 1994.

[29] Bergman, L., & Ohlund, S. (1995, August). Development of an assessment tool to assist in the implementation of concurrent engineering. In Proceedings of Conference on Concurrent Engineering: A Global Perspective (pp. 499-510).

[30] Khalfan, Malik MA, et al. "Readiness assessment of the construction supply chain for concurrent engineering." European Journal of Purchasing & Supply Management 7.2 (2001): 141-153.

[31] Khalfan, M. M., & Anumba, C. J. (2000, June). Implementation of Concurrent Engineering in Construction-Readiness Assessment'. In Proceedings of Construction Information Technology (CIT2000) Conference, Reykjavik, Iceland (Vol. 1, pp. 544-555).

[32] Khalfan, Malik MA, and Chimay J. Anumba. "Readiness assessment for concurrent engineering in construction." Concurrent Engineering in Construction Projects. Routledge, 2006. 44-70.

Downloads

Issue

Vol. 3 , Iss. 1 (January 2020)

Article Type

Research Paper

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.