Application of Prefabrication and Assembly to Hong Kong-Zhuhai-Macao Bridge

Authors

  • Huaying Lu Hong Kong-Zhuhai-Macao Bridge Authority

DOI:

https://doi.org/10.30564/frae.v3i2.1792

Abstract

The Hong Kong-Zhuhai-Macao Bridge(HZMB) project, which has just been opened to traffic in 2018. The special location, construction conditions, quality requirements and multiple functions of HZMB brought many challenges, such as management, technology, safety and environmental protection. To meet these challenges and ensure the achievement of high quality and 120 years design service life, the HZMB project first introduced the completely new concept of "Large size, Factory production, Standardization and Assembly", which was fundamental to the design and construction. This was developed in consideration of the difficulties of the offshore environment.

The core idea was Prefabrication and Assembly, which was to change this HZMB project into onshore work as much as possible by cutting this mega sea-crossing into large sized components, which could be prefabricated on land and then transported to the offshore site for assembly. The success of the HZMB undoubtedly has led the technology of prefabrication and assembly to a new height and recognized scale. This paper describes the implementation process of the concept; "Large size, Factory production, Standardization and

Assembly" (LFSA) to the HZMB.

Keywords:

Mega project, Prefabrication, Assembly, Technology, Construction concept

References

[1] Liying, Hans, The Difficulties and Innovation of Immersed Tunnel of Hong Kong-Zhuhai-Macao Bridge. South Energy Construction, Guangzhou China, 2017;04, 1-16

[2] Tian wei, Research on Key Construction Technologies of Assembly for Sea-crossing Bridge with Buried Foundation, Highway, Changsha, China, 2014;10, 30-35

[3] Liang Jiezhong, Quality Management of the precast immersed tunnel element, China Harbour Engineering, 2015;7, 131-133

[4] Gao Xinglin, Innovation and Practice of Hong Kong-Zhuhai-Macao Bridge, 2016;11:11-25

[5] Zhang Jinwen, Project Management Planningn for construction of Hong Kong-Zhuhai-Macao Bridge, Highway, 2012;57(3):143-147

[6] Meng Fanchao, the Design philosophy and bridge's technical innovation of Hong Kong-Zhuhai-Macao Bridge,[J]. Engineering Sciences,2015;17(1):27-35

[7] Liu Xiaodong, The Overall Design and Technical Challenges of the Hong Kong-Zhuhai-Macao Bridge,Taiyuan:China Ocean, 2011:17-20

[8] Chen Rufa, Key Technology of water-stop device installation for embedded Prefabricated pile cap on open sea[I] Highwa,2015;60(10): 94-99

Downloads

Issue

Article Type

Research Paper