Surveying of Tall Buildings over Theory Height within Obstacle Free Airspace

Authors

  • Zeying Lan Guangdong University of Technology
  • Xiangyun Zhou

DOI:

https://doi.org/10.30564/frae.v2i1.241

Abstract

According to the National Airport standards, this article has looked over the height of 180000 buildings in the airfield control height region of Cencun Airport (about 123.6 sq. km) for the frst time. In the paper, based on the planning & approving data and ADS40 aerial survey data, GIS spatial analysis, ADS40 stereo-altimetry technology, field digital measurement and 2D/3D visualization are used synthetically to achieve the results above. Furthermore, the quantity and spatial distribution of over theoretical height buildings are clarifed, which is signifcant to review the airfeld height management and to guide the regulatory plan of Tianhe Intellectualized Business District.

Keywords:

Census for airfeld height control, DEM isohypse model, GIS spatial analysis, ADS40 Stereo-altimetry

References

[1] Suzhi Wu, Yang Liu. The construction of 3DCM for cellular telephone network planning based on ADS40 technology[J]. Bulletin of Surveying and Mapping, 2013, 3:67-69. (in Chinese)

[2] Deren Li, Zhenfeng Shao, Xiaomin Yang. The theory and practice from the digital city to intellectualized city[J]. Geospatial information, 2011, V9(6):1-5. (in Chinese)

[3] Chaokui Li, Shuannin Zhen, Yong Wang, Zhiqiang Wang. Simulation of spatial distribution; visualization for electromagnetic power based on 3DCM[J]. Geotechnical Investigation & Surveying, 2008, 11:54-58. (in Chinese)

[4] Yong Wang, Chaokui Li. The Research on Radio Propagation Prediction Ray Tracing Parallel Computation of 3DCM[J]. Journal of Hunan University of Science & Technology (Natural Science Edition), 2008, V23(2):85-87. (in Chinese)

[5] Guojin He, Gang Chen, Xiaoyun He, Wei Wang, Dingsheng Liu. Over theoreticalcting Buildings Distribution Information of Different Heights in a City from the Shadows in a Panchromatic SPOT Image [J]. Journal of Image and Graphics, 2001, V6(5):425-428. (in Chinese)

[6] Renchun Tan. Summarizing of Three Dimensional City Modal’s Research Actuality[J]. Urban Geotechnical Investigation & Surveying, 2007, V4(3):42-46. (in Chinese)

[7] Brenner C., Haala N. Automated Reconstruction of 3D City Models In 3D Synthetic Environment Reconstruction[M], Kluwer Academic Publishers. 2001.

[8] Xinru Tu, Miaozhong Xu, Li Liu. The Geometric Calibration of Airborne Three-line-scanner ADS40[J]. Acta Geodaetica et Cartographica Sinica, 2011, V40(1): 78-83. (in Chinese)

[9] Weijun Yang, Changhui Li, Hong Lin, Pengcheng Zhang. Automatic process system of ADS40 Digital Photogrammetry[J]. Engineering of Surveying and Mapping, 2011, V20(1):55-58. (in Chinese)

[10] Xiaohong Li. Study on ADS40 production system[J]. Science of Surveying and Mapping, 2009, V34(6):212-214. (in Chinese)

[11] Xiang Gao, Dongling Zhao, Wei Zhang. On the Methods of Obtaining the Building Height Information from High-resolution Remote Sensing Images[J]. Bulletin of Surveying and Mapping, 2008, V3:41-43. (in Chinese)

[12] Wei You. Multiple Method of DEM Production[J]. Geospatial Information, 2008, 6(5):66-67. (in Chinese)

[13] Deren Li, Song Xia, Wanshou Jiang, Zhenfeng Shao. Approach for Terrain Change Detection and DEM Updating[J]. Geomatics and Information Science of Wuhan University, 2006, 31(7):565-568. (in Chinese)

[14] Deren Li, Song Xia, Wanshou Jiang. Approach for Terrain Change Detection and Updating Based on Orthoimage Matching[J]. Geography and Geo-Information Science, 2006, 22(6):9-11. (in Chinese)

[15] Song Xia, Deren Li, Zhaocong Wu. On 3D change detection with multi-source spatial data[J]. Science of Surveying and Mapping, 2007, 32(1):49-50. (in Chinese)

Downloads

Issue

Vol. 2 , Iss. 1 (January 2019)

Article Type

Research Paper

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.