Study on Ground Engineering and Management of Carbonate Oil Field A under Rolling Development Mode

Authors

  • Hang Chen China Aviation Oil Co., Ltd. Southwest

DOI:

https://doi.org/10.30564/frae.v4i1.3157

Abstract

Carbonate rock has the characteristics of complicated accumulation rules, large-scale development, high yield but unstable production. Therefore, the management and control of surface engineering projects of carbonate rock oil and gas reservoirs faces huge difficulties and challenges. The construction of surface engineering should conform to the principle of integrated underground and ground construction and adapt to the oilfield development model. This paper takes the newly added area A of the carbonated oil field as an example to study the ground engineering under the rolling development mode and aims to provide the constructive ideas for the surface engineering under rolling development mode. The overall regional process design adheres to the design concept of "environmental protection, efficiency, and innovation", strictly follows the design specifications, and combines reservoir engineering and oil production engineering programs, oil and gas physical properties and chemical composition, product programs, ground natural conditions, etc. According to the technical and economic analysis and comparison of area A, this paper has worked out a suitable surface engineering construction, pipeline network layout and oil and gas gathering and transportation plan for area A. Some auxiliary management recommendations are also proposed in this paper, like sand prevention management and HSE management for carbonate reservoirs.

Keywords:

Carbonate oil field, Rolling development mode, Ground engineering, Ground management

References

[1] JIANG H Y,SONG X M,WANG Y J,et al. Current situation and forecast of the world’s carbonate oil and gas exploration and development. Offshore Oil, 2008, 28 (4): 6-13.

[2] DOI: 10.3969/j.issn.1008-2336.2008.04.002.

[3] LI Yang, KANG Zhijiang, XUE Zhaojie, ZHENG Songqing. Theories and practices of carbonate reservoirs development in China. Petroleum Exploration & Development, 2018,45(4): 669-678.

[4] DOI: 10.11698/PED.2018.04.12.

[5] ZHANG L. China’s construction project management model to explore the current. Science and Technology & Innovation, 2014(19): 105.

[6] DOI: 10.3969/j.issn.2095-6835.2014.19.071.

[7] Dou Z. On Rolling Development of Fractured-Vuggy Carbonate Reservoirs. Xinjiang Petroleum Geology,2013, 34 (3):300-302.

[8] DOI: CNKI:SUN:XJSD.0.2013-03-017.

[9] Li Y. The theory and method for the development of carbonate fractured-cavity reservoirs in Tahe oilfield. Acta Petroleum sinica, 2013, 34 (1), 115-121.

[10] DOI: 10.7623/syxb201301013.

[11] Jiao F. Practice and knowledge of volumetric development of deep fractured-vuggy carbonate reservoirs in Tarim Basin, NW China. Petroleum exploration and development, 2019, 46 (3): 552- 558.

[12] DOI: 0.11698/PED.2019.03.13.

[13] Lu X., Cai Z. A study of the paleo-cavern system in fractured vuggy carbonate reservoirs and oil/gas development: Taking the reservoirs in Tahe oilfield as an example. Oil & Gas Geology, 2010, 31(1): 22-27.

[14] DOI: 10.1016/S1876-3804(11)60008-6.

[15] Lu X., Hu W., Wang Y., et al. Characteristics and development practice of fault-karst carbonate reservoirs in Tahe area, Tarim Basin. Oil & gas geology, 2015, 36(3): 347-356.

[16] DOI: 10.11743/ogg20150301.

[17] Zhang X. The characteristics of Lower Ordovician fissure-vug carbonate oil and gas pools in Tahe oil field, Xinjiang. Petroleum exploration and development,2001, 28(5): 17-22.

[18] DOI: 10.3321/j.issn:1000-0747.2001.05.005.

[19] Zhou X., Yang H. Practice and Effectiveness of Carbonate Oil-Gas Reservoir Exploration-Development Integration in Tarim Oilfield. Petroleum geology, 2012, 17(5):1-9.

[20] DOI: 10.3969/j.issn.1672-7703.2012.05.001.

[21] China National Standard. GB 50350-2015 “Oil Field Oil and Gas Gathering and Transportation Specifications”.

[22] China National Standard. GB17820-2012 "Natural Gas".

[23] China Industry Standard. SY/T 0049 "Oilfield Surface Engineering Construction Planning and Design Code".

[24] China National Standard. GBT 23258-2009 "Code for Corrosion Control in Steel Pipelines".

[25] China National Standard. GB 50183 "Code for Fire Protection Design of Oil and Natural Gas Engineering".

[26] China Industry Standard. SY/T 0048 "Oil and Natural Gas Engineering General Drawing Design Code".

[27] China National Standard. GB/T 50087 "Code for Design of Noise Control in Industrial Enterprises".

[28] China National Standard. GBZ 1 "Enterprise Design Sanitary Standard".

[29] China Industry Standard. SY/T0699-2006. "Requirements for Anti-sulfide Stress Cracking Metal Materials for Natural Gas Ground Facilities".

[30] Xue L., Zhou X., Yan Y., et al. Material selection of the production casing in high -temperature sour gas reservoirs in the Changxing Formation, Yuanba Gas Field, northeastern Sichuan Basin. Natural gas industry, 2013, 33(1): 1-5.

[31] DOI: 10.3787/j.issn.1000-0976.2013.01.014.

[32] Chi K., Zhou Y., Chen L., et al. A Study on the Selection of Sulfide Resistant Pipes for Gathering System of Jingbian Gas Field. Inner Mongolia Petrochemical Industry, 2013, (1): 53-55.

[33] DOI: 10.3969/j.issn.1006-7981.2013.01.023.

[34] Sun F., Ma Z., Song X., et al. Research Progress of Material Selection and Protection Technology on Oil and Gas Pipeline. Hot Working Technology, 2013, 42(6): 34-37.

[35] DOI: CNKI:SUN:SJGY.0.2013-06-011.

[36] China National Standard. GB 50251-2015 “Code for Design of Gas Pipeline Engineering”.

[37] Zhou H., Liu M. Research on Wax Control Technology

[38] for Oil Field Gathering Pipeline. Chemical Enterprise Management, 2014, (2): 1-3.

[39] DOI: 10.3969/j.issn.1008-4800.2014.02.080.

[40] Li Y., Kou J., Tang J. et al. Experiment study of pigging

[41] technology for multiphase flow in pipelines. Acta petrolei sinica, 2002, 23(5): 101-104.

[42] DOI: 10.3321/j.issn:0253-2697.2002.05.021.

[43] Wang C., ZHU L. Measures of Controlling Plug Flow in the Pipeline Transporting natural gas and condensate fluids. Natural gas industry, 2008, 28(11): 106-108.

[44] DOI: 10.3787/j.issn.1000-0976.2008.11.032.

[45] China National Standard. GB/T 23258 "Code for Internal Corrosion Control of Steel Pipelines".

[46] China National Standard. GB/T 21447 "Code for External Corrosion Control of Steel Pipelines".

[47] China National Standard. GB/T 21448 "Cathodic Protection of Buried Steel Pipelines" Relevant regulations of Technical Specification".

[48] China National Standard. GB 23258-2009 "Code for Internal Corrosion Control of Steel Pipelines.

[49] China National Standard. GB 50052 "Code for Design of Power Supply and Distribution System".

[50] China Industry Standard. SY/T 0033 "Code for Design of Oil and Gas Field Transformation and Distribution".

[51] Yang T. Oilfield Road Sand Prevention Design. Oil-gasfield Surface Engineering, 2007, 26(7): 40-41.

[52] DOI: 10.3969/j.issn.1006-6896.2007.07.027.

[53] Zhou H., Liu J., Xu X., et al. Analysis on the Growth Status of the Shrubs along the Biological Sand-control Experimental Section of the Oil Base Road in the Hinterland of Taklamakan Desert. Arid Zone Research, 2002, 19(4): 25-27.

[54] DOI: CNKI:SUN:GHQJ.0.2002-04-005.

[55] China National Standard. GB50223-2008"Classification Standard for Seismic Protection of Construction Engineering".

[56] China National Standard. GB50011-2010 "Building "Code for Seismic Design".

[57] China National Standard. GB50176-93 "Code for Thermal Design of Civil Buildings".

[58] China National Standard. GB60183-2004 "Code for Fire Protection Design of Petroleum and Natural Gas Engineering".

[59] Li J. Environment Risk Evaluation and Management of HSE System in Oilfield Production. Drilling & Production Technology, 2008 31(4), 135-138.

[60] DOI: 10.3969/j.issn.1006-768X.2008.04.045.

Downloads

Issue

Vol. 4 , Iss. 1 (April 2021)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.