Irregularities and Roughness

Authors

  • G. T. Michaltsos National Technical University of Athens, Athens, Greece
  • T. Avraam National Technical University of Athens, Athens, Greece

DOI:

https://doi.org/10.30564/jaeser.v4i3.3312

Abstract

The periodically repeated pavement irregularities and their effect on the dynamic behavior of a bridge are the subject of this paper, as well as a new point of view of how the surface roughness operates on vehicles. The authors observed that the models used so far accept that the wheels are always in contact with the roughness curve. But in reality the wheels only come in contact with the peaks of the roughness curve by applying impact forces. The theoretical formulation is based on a continuous approach that has been used in literature to analyze such bridge. The procedure is carried out by the modal superposition method, while the obtained equations are solved by using Duhamel’s integrals. Important conclusions for structural design purposes can be drawn through a variety of numerical examples.

Keywords:

Irregularities, Roughness, Bridges Dynamics, Vehicle models

References

[1] Carey W.N. Jr., Irick P.E., “The pavement serviceability-performance”, Concept. HRB, Bull. 250, 1960, 40-48.

[2] Kaneshige I. “Power spectra analysis of a vehicle vibration by Road Surface Roughness”, J. of Society of Automotive Eng. of Japan, V. 18(4), 1964, 261- 267.

[3] Kawai T., Morisaki K., “Relationships between Characteristics and Road Surface and Riding Comfort of Vehicle”, Mitsubishi Juko Giho, V. 2(2), 1965, 20-27.

[4] Dodds G.J., Robson J.D., “Description of Road Surface Roughness”, J. of Sound and Vibration, V. 31(2), 1973, 175-183.

[5] Healey A.J., Nathman E., Smith C.C., “An Analytical and Experimental Study of Automobile Dynamics with Random Roadway Imputs”, Journal of Dynamic Systems, Measurement and Control, Series G. Vol. 99, 1977, 284-292.

[6] Honda H., Kajikawa Y., Kobori T., “Spectra of Road Surface Roughness on Bridges”, J. of Structural Division (ASCE), V. 108, 1982, 1956-1966.

[7] Wang T.L., Huang D., “Cable-Stayed Bridge vibration due to road surface roughness”, Journal of Structural Engineering, 118(5), 1995, 1354-1374.

[8] Cheng Y.S., Au F.T.K., Cheung Y.K., and Zheng D.Y., “On the Separation between Moving Vehicles and Bridge”, J. of Sound and Vibration 222(50), 1999, 781-810.

[9] Fatard M., Laflamme M., Savarad M., and Bennur M., “Dynamic Analysis of Existing Continuous Bridge”, Journal of Bridge Engineering, 3(1), 1998, 28-37.

[10] Chang D., and Lee H., “Impact factors for simple- span highway girder bridges”, Journal of Structural Engineering, 120DeWolf(3), 1994, 704-715.

[11] Huang D.P., and Wang T.L., “Vibration of highway steel bridges with longitudinal grades”, Computers and Structures, 69(2), 1998, 235-245.

[12] Kou J.W., and DeWolf J.T., “Vibration behavior of continuous span highway bridge-influencing variables”, Journal of Structural Engineering, 123(3), 1997, 333-344.

[13] Yang Y.B., Liao S.S., and Lin B.H., “Impact Formulas for Vehicles Moving over Simple and Continuous Beams”, Journal of Structural Engineering, 121(11),1995, 1644-1650.

[14] Wang P., Ding Yong., “Optimazation of vehicleinduced vibration and structure-born noise of Bridge Based on computing”, Int. J. of Engineering and Technology, V. 11(3), 2019.

[15] Wang G., Zhou J., “Research on the Influence of Pavement Roughness level on the Driving Comfort”, Int. Conference on Civil and Hydraulic Engineering, IOP Conf. Series: Earth and Enviromental Sciences 304, 2019. DOI: https://doi.org/10. 1088/1755-1315/304/3/032059.

[16] Koc M.A., Esen I., “Modeling and analysis of vehicle-structure road coupled interaction considering structural flexibility, vehicle parameters and road roughness”, Journal of Mechanical Science and Technology, 31(5), 2017, 2057-2074.

[17] Park D.W., Papagiannakis A.T., Kim I.T., “Analysis of Dynamic Vehicle loads using Vehicle Pavement interaction model”, KSCE Journal of Civil Engineering, 18(7), 2014, 2085-2092.

[18] Yang Y.B., Li Y.B., Chang K.C., “Effect of road surface roughness on the response of a moving vehicle for indentification of Bridge frequencies”, Interaction and Multiscale Mechanics, V. 5(4), 2012, 347-368.

[19] Kim C.W., Inone S., Suriura K., “Extracting bridge frequencies from dynamic responses of two passing vehicles”, Insights and Innovations in Structural Engineering Mechanics and Computation – Zingoni Ed, 2016, 1858-1860.

[20] Lalthlamuana R., Talukdar S., “Conditions of Visibility of Bridge Natural Frequency in Vehicle Vertical Acceleration”, Procedia Engineering 144, 2016, 26-33.

[21] Michaltsos G.T., Konstantakopoulos T.G., “Dynamic response of a bridge with surface deck irregularities”, J. of Vibration and Control, 6, 2000, 667-689.

[22] Michaltsos G.T., “ Bouncing of a vehicle on an irregularity – A mathematical model”, J. of Vibration and Control, 16(2), 2010, 181-206.

[23] Kounadis A.N., “An efficient and simple approximate technique for solving nonlinear initial and boundary-value problems”, Computational Mechanics, 9, 1992, 221-231.

[24] LeNgo-Tran T., Hayashikawa T., Matsumoto T., “Three-dimensional bridge-vehicle interaction analysis of simply supported twin I-girder bridge”, J. of Structural Engineering V.54A, 2008, 181-188.

[25] Wang T.L., Huang D., Shahawy M., “Vibration and Impact in Multigirder Steel Bridges”, J. of Structural Engineering V. 118(8), 1992, 2222-2238.

Downloads

How to Cite

Michaltsos, G. T., & Avraam, T. (2021). Irregularities and Roughness. Journal of Architectural Environment & Structural Engineering Research, 4(3), 31–46. https://doi.org/10.30564/jaeser.v4i3.3312

Issue

Article Type

Article