Time and Cost Planning of a Housing Construction Project Using Building Information Modelling

Authors

  • Siddesh pai University of Petroleum and Energy Studies(UPES), National Institute of Construction Management and Research(NICMAR)
  • Amit Shriwas National Institute of Construction Management and Research (NICMAR)

DOI:

https://doi.org/10.30564/jcr.v1i2.1155

Abstract

Conventional ways of building construction process lack proper task scheduling and      planning of the project work at the site resulting in poor monitoring of the whole process. Building information modelling (BIM) creates a platform where all the information of every single element of the construction process can be virtually integrated. The integration of 3D elements of a building model with its scheduled time and cost parameters results in 5D BIM. This feature enables the visualization, scheduling, planning, and monitoring and clash detection of all pre- construction, construction and post-construction processes of a building. The present study used the information of a live project of a traditionally built residential building which was remodelled using 5D BIM technique. The purpose of this study was to compare and analyse the impact of 5D BIM on time and cost parameters of the live project.

Keywords:

5D BIM, Microsoft project, Modelling, Naviswork manager, REVIT, Scheduling, Visualization

References

[1] Mudasir amin chowdary, Dr. Rajendra, vijay .k, vidyashree (2016), Modelling and project planning of a structure by implementing 5d bim technique, ijircce vol. 4, issue 4.

[2] Anil Sawhney, PhD, FRICSAssociate Dean & Director (2016), State of bim adoption and outlook in india, Construction RICS School of Built Environment (RICS SBE), Amity University

[3] By Amol A. Metkari, Dr. A. C. Attar (2015), Application of building information Modelling tool for building project, CRIP vol. 48, issue1.

[4] Peter Smith, Procedia (2015), Project cost management with 5d bim, Social and Behavioral Sciences 226 (2016) 193 – 200.

[5] Azzouz, A., Shepherd, P. and Copping, A (2017), the emergence of building information modelling assessment methods, ijircce vol. 8, issue 4, April

[6] Foroughi, R. (2006). Green construction using BIM. MSc. Thesis.Control Engineering Department. Islamic Azad University of South

[7] Tehran.

[8] Chimple, A., Kheerd, P. and Copping, A (2017), building information modelling and their types, ijircce vol. 8, issue 4, April

[9] Makichu, j. (2006). Advantage in construction using BIM. MSc. Thesis.Control Engineering Department. Islamic Azad University of Sout

Downloads

Issue

Vol. 1 , Iss. 2 (December 2019)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Journal of Construction Research publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Journal of Construction Research agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.