Extended Reality in Quantity Surveying

Authors

  • Tarun Kumar Makkena RICS School of Built Environment, Amity University, India
  • VPS Nihar Nanyam RICS School of Built Environment, Amity University, India

DOI:

https://doi.org/10.30564/jcr.v3i1.3206

Abstract

It is possible for cost professionals to prepare an informed and compendious cost plan by identifying all the factors that cause cost overruns, variations, safety hazards and others without having a significant prior experience. The implementation of Extended Reality can address this phenomenon. The paper aims to introduce the concept of Extended Reality in the field of quantity surveying by exploring its untapped potential and also looks to identify critical barriers in implementing this technology. A detailed review of literature study produced eight critical factors acting as barriers in successful implementation. With the suggestions from the industry professionals, the inter-relationship among these factors were established and prioritised using Interpretative Structural Modelling (ISM) tool. Further, these factors were categorised using MICMAC (Cross-Impact Matrix Multiplication Applied to Classification) analysis. This study identifies, lack of expertise and lack of suitable software as the key driving factors in successful implementation and all the remaining factors are directly or indirectly influenced by them. The sample size considered in building the ISM network is limited to the Indian construction industry. The disadvantages of Extended Reality have not been covered in the study. There may be several negative repercussions to human health due to this technology. This study can be used by industry professionals in understanding how advance technology like this can overcome many challenges pertinent to cost planning and estimation. This study stands out among the few research topics which contribute to reducing the knowledge gap among the cost professionals irrespective of their experience.

Keywords:

Augmented reality, Extended reality, Mixed reality, Virtual reality

References

[1] PlanGrid,“New Research from PlanGrid and FMI Identifies Factors Costing the Construction Industry More Than $177 Billion Annually,”2018.https://www.plangrid.com/press/fmi/(accessed Mar.04, 2019).

[2] M. Miri and M. Khaksefidi, “Cost Management in Construction Projects: Rework and Its Effects,” Mediterr. J. Soc. Sci., vol. 6, no. 6, pp. 209-215, 2016. DOI: 10.5901/mjss.2015.v6n6s6p209.

[3] S. C. C. R. and A. R. Philipp Gerbert, “Shaping the Future of Construction A Breakthrough in Mindset and Technology,” World Econ. Forum, no. May, pp. 1-64, 2016, [Online]. Available: https://www.bcgperspectives.com/Images/Shaping_the_Future_of_ Construction_may_2016.pdf.

[4] Thoughtworks, “eXtending reality with AR and VR - Part I | ThoughtWorks,” 2020. https://www. thoughtworks.com/insights/blog/extending-reality-ar-and-vr-part-i (accessed May 15, 2020).

[5] Global augmented/virtual reality market size 2016- 2022 | Statistic.” https://www.statista.com/statistics/591181/global-augmented-virtual-reality-market-size/ (accessed Mar. 04, 2019).

[6] Deloitte Insights, “Digital reality,A technical primer,”Deloitte University Press, 2017.

[7] SRI International, “Augmented Reality Solutions for Construction Inspection - YouTube,” 2017. https:// www.youtube.com/watch?v=8lY4qaVvR8c (accessed May 15, 2020).

[8] F. Bademosi and R. R. A. Issa, “Implementation of Augmented Reality Throughout the Lifecycle of Construction Projects,” in Advances in Informatics and Computing in Civil and Construction Engineering, Cham: Springer International Publishing, 2019, pp. 307-313.

[9] S. J. Suk, G. Ford, Y. Kang, and Y. H. Ahn, “A Study on the Effect of the Use of Augmented Reality on Students’ Quantity Take-off Performance,” 2017. Accessed: Mar. 05, 2019. [Online]. Available: https:// www.iaarc.org/publications/fulltext/ISARC2017-Paper025.pdf.

[10] A. Behzadi, “American Journal of Engineering Research ( AJER ) Open Access Using Augmented and Virtual Reality Technology in the Construction Industry Ajang Behzadi,” Am. J. Eng. Res., no. January, pp. 350-353, 2017.

[11] K. Kirchbach and C. Runde, “Augmented reality for construction control,” Proc. Int. Conf. Inf. Vis., pp. 440-444, 2012. DOI: 10.1109/IV.2012.76.

[12] M. Zaher, D. Greenwood, and M. Marzouk, “Mobile augmented reality applications for construction projects,” Constr. Innov., vol. 18, no. 2, pp. 152-166, 2018. DOI: 10.1108/CI-02-2017-0013.

[13] M. H. Stoltz, V. Giannikas, D. McFarlane, J. Strachan, J. Um, and R. Srinivasan, “Augmented Reality in Warehouse Operations: Opportunities and Barriers,” IFAC-PapersOnLine, vol. 50, no. 1, pp. 12979- 12984, 2017. DOI: 10.1016/j.ifacol.2017.08.1807.

[14] S. Agarwal, “Review on Application of Augmented Reality in Civil Engineering,” Int. Conf. Inter Discip. Res. Eng. Technol., pp. 68-71, 2016.

[15] C. Woodward et al., “Case Digitalo-A Range of Virtual and Augmented Reality Solutions in Construction Application,” 2017. Accessed: Mar. 05, 2019. [Online]. Available: http://virtual.vtt.fi/virtual/proj2/ multimedia_old/publications/casedigitalo-maribor2007-old.pdf.

[16] O. A. Olatunji, “Virtual Reality and Estimating Practice: A Software Selection Model for Estimating,” 28th Int. Symp. Autom. Robot. Constr. (ISARC 2011), no. June 2011, 2017.

[17] DOI: 10.22260/isarc2011/0133.

[18] J. Bellos, “Virtual Reality as a Decision Making Tool in Construction Management,” Eur. Conf. Manag. Leadersh. Gov., no. November 2012, pp. 30-IX, 2012. DOI: 10.13140/RG.2.1.1168.4007.

[19] K. E. Haggard, “Case Study on Virtual Reality in Construction.” Accessed: Mar. 05, 2019. [Online]. Available: https://digitalcommons.calpoly.edu/cgi/viewcontent.cgi referer=https://www.google. com/&httpsredir=1&article=1041&context=cmsp.

[20] A. A. Avhad and G. A. Hinge, “Implementation of Virtual Reality in Construction Industry,” Int. J. Innov. Res. Sci., vol. 6, no. 6, pp. 67-69, 2017. DOI: 10.15680/IJIRSET.2017.0606276.

[21] R. Jain and P. Kokate, “Implementation of Virtual Reality in Construction Industry,” 2017. Accessed: Mar. 05, 2019. [Online]. Available: http://ijses.com/.

[22] E. Holt, J. Benham, and B. Bigelow, “Emerging Technology in the Construction Industry: Perceptions from Construction Industry Professionals,” pp. 26.595.1-26.595.10, 2015.DOI: 10.18260/p.23933.

[23] R. Abboud and R. Abboud, “Architecture in an Age of Augmented Reality: Opportunities and Obstacles for Mobile AR in Design, Construction, and Post-Completion,” 2014. Accessed: Mar. 02, 2019.

[24] [Online]. Available: https://www.inglobetechnologies.com/wp-content/uploads/2014/06/IWDS2013-AR-PAPER-R-ABBOUD-MARCH.pdf.

[25] A. Carlsén, “Augmented Construction,” 2018.

[26] J. Whyte and D. Bouchlaghem, “THE PROMISE AND PROBLEMS OF IMPLEMENTING VIRTUAL Differences between CAD and VR .,” p. 8, 1998, Accessed: Mar. 02, 2019. [Online]. Available:http:// itc.scix.net/.

[27] P. Piroozfar, A. Essa, S. Boseley, E. R. P. Farr, and R. Jin, “Augmented Reality ( AR ) and Virtual Reality ( VR ) in construction industry : An experiential development workflow,” Tenth Int. Conf. Constr. 21st Century, no. July, 2018, [Online]. Available: http:// ascpro.ascweb.org/chair/paper/CPRT195002016.pdf.

[28] P. Pejic, M. Lakicevic, S. Krasic, and P. Sidjanin,“Application of Augmented and Virtual Reality in Residential Complex Presentation , Case Study : Energoprojekt Sunnyville,” vol. 12, no. 1, pp. 127-133,2017.

[29] L.-Y. D. and J.-T. W. Guo-Cheng Li, “Construction project control in Virtual reality: A case study,” J. Appl. Sci., 2006.

[30] T. Lorentzen, Y. Kobayashi, and Y. Ito, “Virtual reality for consensus building: Case studies,” Lect. Notes Comput. Sci. (including Subser. Lect. Notes Artif. Intell. Lect. Notes Bioinformatics), vol. 5531 LNCS,pp. 295-298, 2009. DOI: 10.1007/978-3-642-02115-2_29.

[31] S. Woksepp, “Virtual Reality in Construction Tools, Methods and Processes,” Constr. Innov., p. 191,2007.

[32] F. A. and M. Ç. Baydoğan, “Evaluation of Augmented Reality in Architecture Through Sample Applications,” Eurasian J. Civ. Eng. Archit., vol. 1, no. 1, 2017.

[33] P. Pejić, S. Krasić, M. Veljković, S. Sakan, and T. Rizov, “Augmented and virtual reality application in traditional architectural project presentation - Case study of ‘MH Petra’ house,” FME Trans., vol. 45, no. 2, pp. 227-231, 2017. DOI: 10.5937/fmet1702227P.

[34] Autodesk, “Prefabricated Construction - How Gilbane Uses VR to Validate [Video],” 2018. https:// www.autodesk.com/redshift/prefabricated-construction/ (accessed Mar. 05, 2019).

Downloads

Issue

Vol. 3 , Iss. 1 (June 2021)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Journal of Construction Research publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Journal of Construction Research agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.