Finite element analysis of stuffing-box packing subjected to thermo-mechanical loads

Authors

  • Kaoutar BAHOUM Industrial Engineering Laboratory, Sultan Moulay Slimane University
  • Mohammed Diany Industrial Engineering Laboratory, Sultan Moulay Slimane University
  • Mustapha Mabrouki Industrial Engineering Laboratory, Sultan Moulay Slimane University
  • Jaouad Azouz Industrial Engineering Laboratory, Sultan Moulay Slimane University

DOI:

https://doi.org/10.30564/jmer.v1i1.139

Abstract

The principal rule for the stuffing-box packings is to ensure the stem valve sealing. The behavior of these systems is affected by the operating conditions, which are the gland axial stress, the temperature, and the fluid pressure, as well as the mechanical and geometrical properties of the various components. In this paper, a numerical study using finite element method is presented to evaluate the radial contact stresses, the axial stresses, and the lateral pressure coefficients in a stuffing box system under the tightening gland load and the temperature field.

Keywords:

Finite element method, Gland stress, Stuffing box, Temperature

References

[1] Ochonski, W., 1988, “Radial Stress Distribution and Friction Forces an a Soft-Packed Stuffing-Box Seal,” Tribology International, 21(1), pp. 31-38.

[2] Pengyun S., Kuangmin C. and Zongyun D., 1997, "A Theoretical Analysis of the Lateral Pressure in a Soft Packed Stuffing Box Seal," Tribology International, 30(10), pp. 759-765.

[3] Diany, M. and Bouzid, A,-H. Evaluation of contact stress in stuffing box packing. In : 2006 ASME-PVP conference, paper no. PVP2006-ICPVT11-93083, Vancouver, Britisg Columbia ; 2006.

[4] Bartonicek, J., and Schoeckle, F., 1996, “Approach to a Correct Function of Stuffing Boxes,” 1996 Computer Technology: Applications and Methodology, ASME, New York, Vol. 326, pp. 115–121.

[5] Bartonicek, J., and Schoeckle, F., 1996, “Tightness and Accurate Mounting of Bolted Joints,” 1996 Computer Technology: Applications and Methodology, ASME, New York, Vol. 326, pp. 171–178.

[6] Klenk, T., Kockelmann, H., Roos, E., Bartonicek, J., and Schoeckle, F., 1999, “Characteristics and Testing Techniques for Stuffing Box Packings,” ASME Pressure Vessels and Piping Conference, Vol. 382, pp. 135–143.

[7] Klenk, T., Kockelmann, H., Hahn, R., and Roos, E., 2001, “High Grade Proof for Gaskets According to TA-Luft and VDI 2440,” ASME Pressure Vessels and Piping Division Conference, Vol. 416, pp. 163–167.

[8] Diany, M., and Bouzid, A., 2009, “Analytical Evaluation of Stresses and Displacements of Stuffing-Box Packing Based of Flexibility Analysis,” Tribol. Int., 42 (6), pp. 980–986.

[9] Diany, M. and Bouzid, A,-H. An Experimental– Numerical Procedure for Stuffing Box Packing Characterization and Leak Tests. ASME Journal of Tribology, 133(1), (2011), p. 012201-8.

[10] Kazeminia, M. and Bouzid, A.-H. Analysis of stresses and strains in packed stuffing-boxes. In: Proceedings of the ASME Pressure Vessels and Piping Conference (PVP ’14), Anaheim, Calif, USA, (2014) pp. 1–11.

[11] Kazeminia, M. and Bouzid, A.-H. Analytical and numerical evaluation of the axial stress distribution of two soft-packed stuffing-box configurations. In: Proceedings of the ASME Turbo Expo 2014, Turbine Technical Conference and Exposition, D¨usseldorf, Germany, 2014, pp.1–8.

[12] Kazeminia, M. and Bouzid, A.-H. Stress analysis of packed stuffing-boxes. Journal of Pressure Vessel Technology, vol. 137, no.5, (2015) Article ID 051205

[13] Veiga, J. C., Carmo, A. S. and Girao, C. D. The influence on the stuffing box of the forces generated by packing thermal expansion. In: Proceedings of the Pressure Vessels Piping Division Conference (ASME ’11), Baltimore, Md, USA, July 2011. pp. 227–233,

[14]

[15] Girao, C. D. and Guenther, K. Evaluation of stuffing box forces associated with the thermal expansion of e-PTFE and graphite packing sets. In: Proceedings of the ASME Pressure Vessels and Piping Conference, Toronto, Canada, July 2012, pp.167173

[16] Ansys. Standard Manuel. Version 17.1

Downloads

Issue

Article Type

Articles