Full Issue

View or download the full issue PDF

Table of Contents


Dounia Alihellal, Lemnouer Chibane, Mohamed El-Amine Slimani

Article ID: 277
Views - 261  (Abstract) PDF - 53  (Download)
Abstract: In the present work, the deactivation by sintering of cobalt based catalyst during Fischer-Tropsch synthesis at low temperature was studied by numerical simulation. For this purpose, a mathematical model was developed. The obtained simulation results allowed us to highlight and improve the understanding of the deactivation phenomena of cobalt based Fische...
Abdelkader Doudou

Article ID: 508
Views - 268  (Abstract) PDF - 77  (Download)
Abstract: Heating swimming pools in an efficient and ecological way has become mandatory for the protection of the environment, but also for technological development and energy saving. The heating must maintain the quality of bathing water, avoiding temperature variations between the different depths and locations of the pool. There are currently several types of ...
Lyudmila Ivanovna Gracheva

Article ID: 763
Views - 205  (Abstract) PDF - 34  (Download)
Abstract: A fundamental understanding of the mechanism of material interaction with a medium is based on correspondence between experimental studies and actual operating conditions of a given model or a structure. The study of performance of thermal shield structures was based on computations brought about considering physical properties of materials obtained under...
Zichen Deng, Siqi An, Qingjun Li

Article ID: 914
Views - 303  (Abstract) PDF - 70  (Download)
Abstract: Dielectric elastomer (DE) balloons are intensively developed as sensors, actuators, and generators.  To ensure electrical safety, a DE balloon can be covered by an external passive layer. In this paper, the dynamic behaviours and active control for the DE balloon coupled with the passive layer are investigated. Based on the Hamilton’s principle, the dynam...


Farshad Abbasi

Article ID: 578
Views - 270  (Abstract) PDF - 59  (Download)
Abstract: Corrosion Fatigue is the mechanical degradation of a material under the joint action of damage mechanisms corrosion and fatigue. Corrosive nature of the seawater puts severe durability requirements on materials of which are often exposed to corrosion fatigue and abrasive conditions simultaneously. Therefore, identification of the combined effects of both ...