Using Green Cold Pressing to Produce High Quality Fish Oil From Industrial Salmon Waste

Authors

  • Tarek Fouda Department of Agricultural Engineering, Faculty of Agriculture, Tanta University, Egypt

DOI:

https://doi.org/10.30564/jzr.v2i1.2021

Abstract

The  main  objective  of  this  research  was  to  determine  the  amount of oil fish  were extracted from fish west resulted from butchering, cutting and splitting processes before salmon smoking by using cold  pressing `methods.  The  amount  and  the  characteristics  of  extracted  of  oil were  tested at Regional Centre for food and feed the USDA Agricultural Research Center laboratory. The  samples  were  used  from fresh Salmon  waste about 1000g from each of the (head, skin,  viscera,  backbone,  frames  and  cuts  off).  This waste recorded  more than  22%  of  the  total  mass  from  salmon  fish with used modern extract machine. in this experiment  the results  revealed  the  fresh  salmon  waste  have  more  than  16 %  of  oil  fish  per  one  kg  of  salmon  waste.  The oil weight from Salmon waste for (head, skin,  viscera,  backbone,  frames  and  cuts  off). was increased with pressing time increase as well as oil productivity increased.  The  optimum  conditions  at  pressing  time  was  200  min, for all salmon waste components .  Oil  productivity   fluctuated according to waste sources  was  190, 210, 86, 188, 178 and 90 g.oil/1000  g. by head, skin, off  cuts , terming, ,  viscera , and backbone frames,  Salmon  by-products,  oil  productivity  was ranged between 8.60 to 21.00%  at  constant  pressure. High contents of functional EPA (20:5 ω 3) and DHA (22:6 ω 3) for oil fish  

Keywords:

Salmon, Waste extract, Efficiency, Yield, Smoking, Fish oil, Cold pressing, Wet rendering

References

[1] Eslick G. D., Howe P. R., Smith C., Priest R., Bensoussan A., 2009 Benefits of fish oil supplementation in hyperlipidemia: a systematic review and meta-analysis. International Journal of Cardiology 136:4-16.

[2] Fouda, T.Z (2018) Waste Management For Smoking Salmon By- Products To Extract Omega-3 Fish Oil Scientific Papers Series Management, Economic Engineering in Agriculture and Rural Development Vol. 18, Issue 3, 2018 PRINT ISSN 284-7995, E-ISSN 2285-3952

[3] Ghaly, A. E., Dave, D., Brooks, M. S., Budge, S. M., 2010, Production of biodieselby enzymatic transesterification: A critical review. American Journal of Biochemistry and Biotechnology, 6:54-76.

[4] Kazuo Miyashita (2019) Prevention of Fish Oil Oxidation Journal of Oleo ScienceCopyright ©2019 by Japan Oil Chemists’ Society doi: 10.5650/jos.ess18144J. Oleo Sci. 68, (1) 1-11 (2019)

[5] Khoshmanesh, S. (2006). Design of Solar Dehydrator, Coupled with Energy Storage in Rock Bed Reservoir for Fish Drying Process. International Conference on Energy and Environment (ICEE), Universiti Tenaga Nasional, Bangi, Selangor, Malaysia, 28-30 August 2006, pp. 1-8.

[6] Lin, C. Y., Li, R. J., 2009, Fuel properties of biodiesel produced from the crude fish oil from the soapstock of marine fish. Fuel processing technology, 90(1), 130-136.

[7] Mbatia B., Adlercreutz D., Adlercreutz P., Mahadhy A., Mulaa F., Mattiasson B., 2010 Enzymatic oil extraction and positional analysis of ω-3 fatty acids in Nile perch and salmon heads. Process Biochemistry 45:815-819.

[8] Ramírez, A.(2017) Salmon by-product proteins FAO Fisheries Circular .pp1-6 No. 1027. Rome, FAO. 2007. 31p. ISSN 0429-9329 http://www.fao.org/3/a-a1394e.pdf

[9] Rustad, T., 2007, Physical and Chemical Properties of Protein Seafood by-products. CRC Press.

[10] Saldanha L. G., Salem Jr. N., Brenna J. T., 2009 Workshop on DHA as a required nutrient: overview. Prostaglandins, Leukotrienes and Essential Fatty Acids 81:233- 236.

[11] Uitterhaegen E., Evon P. (2017), Twin–cold extrusion technology for vegetable oil extraction: A review, Journal of Food Engineering, 212, pp. 190–200.

Downloads

Issue

Vol. 2 , Iss. 1 (January 2020)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Journal of Zoological Research publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Journal of Zoological Research agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.