Organic Polymer Materials for Light Emitting Diode Applications
Article ID: 4348
DOI: https://doi.org/10.30564/opmr.v3i2.4348
Abstract
There are two common types of polymers (thermoplastics and thermosets), which have been classified by various methods depending on their molecular structures. The bonding of molecular chains is the fundamental physical difference between these two polymer types. The polymer types are named based on their general thermal and processing characteristics, and chemical structure, which in turn significantly influence their polymer properties.
Keywords
Full Text:

References
[1] Brinson, H.F., Brinson, L.C., 2008. Characteristics, Applications and properties of polymers, in: Polymer Engineering Science and Viscoelasticity: an Introduction. Springer US, Boston, MA. pp. 55-97.
[2] https://byjus.com/chemistry/difference-between-thermoplastic-and-thermosett ing-plastic/.
[3] Zhang, J., de Souza, M., Creighton, C., Varley, R.J., 2020. New approaches to bonding thermoplastic and thermoset polymer composites. Compos. Appl. Sci. Manuf. 105870.
[4] Pinto, D.G., Rodrigues, J., Bernardo, L., 2020. A review on thermoplastic or thermosetting polymeric matrices used in polymeric composites manufactured with banana fibers from the pseudostem. Appl. Sci. 10, 3023.
[5] Jogur, G., Nawaz Khan, A., Das, A., Mahajan, P., Alagirusamy, R., 2018. Impact properties of thermoplastic composites, Textil. Prog. 50, 109-183.
[6] Liao, H.K., Wu, C.L., Chou, J.C., Chung, W.Y., Sun, T.P., Hsiung, S.K., 1999. Multi-structure ion sensitive field effect transistor with a metal light shield. Sensor. Actuator. B Chem. 61, 1-5.
[7] Yadav, S., Bajpai, P.K., 2018. Effect of substrate on Cus/Pva nanocomposite thin films deposited on glass and silicon substrate. Soft. Nanosci. Lett. 8, 9.
[8] Salman, S., Bakr, N., Humad, H.T., 2018. Section C: physical sciences DSC and TGA properties of PVA films filled with Na2S2O35H2O salt. J. Chem. Biol. Phys. Sci. 8, 001-011.
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.