Railway Engineering Experimental Teaching Research Based on the Combination of Field Experiment and Virtual Reality (VR) Technology——Taking Central South University as an Example

Authors

  • Zhiping Zeng School of Civil Engineering, Central South University
  • Zhihui Zhu School of Civil Engineering, Central South University
  • Weidong Wang School of Civil Engineering, Central South University
  • Ping Lou School of Civil Engineering, Central South University
  • Wei Li School of Civil Engineering, Central South University
  • Bin Yan School of Civil Engineering, Central South University
  • Hu Ji School of Civil Engineering, Central South University

DOI:

https://doi.org/10.30564/ret.v3i3.2139

Abstract

At present, rail transit is developing rapidly in the world, and this means new and changing requirements for the training of talents in railway engineering experiments. Given the current problems of limited laboratory/field instruments for railway engineering experimentsand the safety/administrative difficulties of going to the frontline of railway lines to teach railway engineering experiemnts in the field, the Department of Railway Engineering of Central South University tried to introduce virtual reality (VR) technology to teach students experiments in the field of railway engineering. Through the virtualized experimental methods, students can carry out railway engineering experiments such as; vehicle wheel pair off-axis experiments, track geometry and position detection, etc by immersive means. It was observed that after performing virtual simulation experiments, students appeared conversant in subsequent field experiments. Thus, VR greatly improves the teaching efficiency of railway engineering experiments.

Keywords:

Teaching research, Railway engineering experimental, VR technology

References

[1] Wang Weidong, Xie Youjun, Lou Ping, et al. Exploration and practice of engineering talent training in the rail transit industry [J]. Higher Education in Architecture, 2018, 27 (06): 36-43. (in Chinese)

[2] Kang Zhuang, Zhou Shunhua. Discussion on the team training model of engineering graduates——Taking the railway engineering major of Tongji University as an example [J]. Degree and Graduate Education, 2013 (01): 19-22. (in Chinese)

[3] Wang Bin, Cai Xiaopei, Yang Na. Amendment of the railway-based professional training program based on achievement-oriented [J]. Higher Architectural Education, 2018, 27 (05): 41-46. (in Chinese)

[4] Yao Yubin. Development of teaching case of mechanical product manufacturing process based on VR technology [D]. Shandong University of Architecture, 2017. (in Chinese)

[5] Li Ji. Classroom teaching case design of rail transit vehicle construction course in secondary vocational school based on VR technology [D]. Changchun Normal University, 2019. (in Chinese)

[6] Zeng Zhiping. Research on the training method of railway engineering professional talents under the situation of high-speed railway leaping development [J]. Journal of Changsha Railway Institute (Social Science Edition), 2009,10 (01): 13 + 28. (in Chinese)

[7] Wang Biao. Exploration and Innovation of Classroom Teaching of Railway Engineering and Civil Engineering Specialty——Comment on "Railway Bridge Construction" [J]. Chinese Journal of Education, 2017 (11): 124. (in Chinese)

[8] Zhou Shunhua, Jin Hao, Xiao Junhua. On Railway Engineering Education in China under the New Situation of “One Belt and One Road” —— Tongji University as an example [J]. University Education, 2018 (03): 21-24. (in Chinese)

[9] Ding Minxu. Research and Practice of the “2 + 1” Talent Training Model of Higher Vocational School-Enterprise Cooperation——Taking Railway Engineering Technology as an Example [J]. Higher Vocational Education (Journal of Tianjin Vocational University), 2015, 24 (05 ): 85-87 + 92. (in Chinese)

Downloads

Issue

Vol. 3 , Iss. 3 (July 2020)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Review of Educational Theory publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Review of Educational Theory agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.